* These are Tibbo BASIC/C-programmable devices and their function depends on the loaded app.
We offer many ready-to-use apps, among them a serial-over-IP (SoI) app and Modbus Gateway app.
Memory Wipe Demo

Memory Wipe Demo

Release Date:18 Feb 2011
Most Recent Update:18 Feb 2011
Project files:Open GitHub repository
Platforms:DS1100, DS1101W, DS1102W, DS1202, DS1206, EM1000, EM1000W, EM1001W, EM1202, EM1202W, EM1206, EM1206W, EM2000W, EM500W, TPP2W, TPP2W(G2), TPP3W, TPP3W(G2)
Try it on:Any programmable Tibbo device

About the Application

Some Tibbo BASIC projects save data to device memory; then, when you upload another project, the data is still there. Or perhaps you want to upload the same project again, but test your setting initialization code. In other words, you want the device to be wiped clean before you upload your project, so you can see what your code does on a brand-new device.

This is what this little project does. Run it on your device, and it will simply wipe the EEPROM squeaky clean, filling it up with zeros. It starts up with the red LED on, and once it's done initializing the memory, it switches the green LED on instead. Then you can load your other project and run it as if it's on a brand-new device.

Memory Wipe Demo