* This is a Tibbo BASIC/C-programmable device and its function depends on the loaded app.
We offer many ready-to-use apps, among them a serial-over-IP (SoI) app, Modbus Gateway app, and Sensor Hub app.
Character Display Control

Character Display Control

Release Date:23/05/17
Most Recent Update:23/05/17
Project files:Open GitHub repository
Minimum TIDE version:5.03.07
Minimum TiOS version:TPP2, TPP3: 3.60.00; TPP2(G2), TPP3(G2): 3.60.92
Platforms:LTPP3
Library:
Try it on:TPS, add Tibbits as needed

This application shows how to drive a character display through our 8-bit port Tibbit. We used MT-20S4A 20x4 and Winstar 24x2 character display in our test (). However, most of the available character displays should work with this project.

You will need:

  • LTPP3
  • Tibbit #00-3
  • Tibbit #41

Also, LCD pin pairs: 1 & 16 and 2 & 15 should be connected together. A potentiometer should be installed between pin 3 and 1 for LCD contrast regulation (we used 10KOhm).

Character Display Control