EM1000 as a 4-port Serial-over-IP Module

The EM1000 ships blank. You will need to upload the right SoI binary into the module.

The EM1000 is a Tibbo BASIC/C-programmable IoT module with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. The EM1000 has four independent UARTs.

The EM1000 may be uploaded with a fully functional serial-over-IP (SoI) application that turns the module into a powerful four-port serial-over-IP (SoI) device.

All three network interfaces — Ethernet, Wi-Fi, and GPRS — are fully supported by the SoI application, with automatic switchover depending on the network conditions.

As an SoI converter, the EM1000 is compatible with Tibbo Device Server Toolkit (TDST) for Windows. TDST includes the Virtual Serial Port Driver (VSPD), which enables you to use all four serial ports of the module as remote COM ports of your PC. The Linux version of the VSPD is available as well.

Click here for the description of the EM1000 as a programmable module.

* Requires the GA1000 Wi-Fi add-on, which can be connected externally or piggybacked on top of the EM1000 ("EM1000G" ordering code).

** Requires a standard GPRS modem (i.e. Simcom's SIM900), to be connected to the UART #4 of the EM1000.

Key Features

10/100 Base-T Ethernet port (no RJ45/magnetics)
High-performance CPU (T1000)

Optional Wi-Fi connectivity
(with the GA1000 add-on)

Optional GPRS connectivity (requires an external modem)
Prototyping-friendly 2.54mm (100mil) pin pitch
3.3V power



  • 10/100BaseT auto-MDIX Ethernet port (no magnetics).

  • Optional Wi-Fi interface (requires the GA1000 add-on module).

  • Can control a GPRS modem (such as the SIM900).

  • Four high-speed serial ports (CMOS):

    • Baudrates of up to 921,600bps;
    • None/even/odd/mark/space parity modes;
    • 7 or 8 bits/character;
    • Full-duplex mode with RTS/CTS and XON/XOFF flow control;
    • Half-duplex mode with direction control.
  • Based on the high-performance T1000 IC.

  • Four control lines for status LEDs:

    • Two control lines for green and red main status LEDs;
    • Control line for the Ethernet link LED;
    • Control line for the 100Mb LED.
  • Reliable power-on/brown-out reset circuit.

  • Power: 230mA @ 3.3V (100Base-T mode, PLL on).

  • Dimensions (LxWxH): 38.4x28.4x5.5mm.

  • Prototyping-friendly 2.54mm (100mil) pin pitch.

  • Operating temperature range: -20 ~ +70C.

  • Firmware is upgradeable through the serial port or network.

  • CE- and FCC-certified.

See Also:

Files and Documentation:

SoI Firmwaresoi_application-4_10-(EM1000EV)(DS1000)(DS1002)(DS1003)-(GA1000).bin
DocumentationSerial-over-IP Solutions Manual
EM1000 Hardware Manual
CE Certificateds1000-em1000-em1000ev-ce.pdf
FCC Certificateds1000-em1000-em1000ev-fcc.pdf