ControllersBoardsModulesDevkits

Development Kits for testing and evaluating
BASIC/C-programmable IoT Modules

These kits will help you test, evaluate, and write apps for our range of BASIC/C-programmable IoT modules.

Affordable evaluation board for the EM2000 IoT moduleEM2000EV, shown with EM2000
(must be purchased separately)

Affordable evaluation board for the EM2000 IoT module

This evaluation board offers the bare essentials required for testing the EM2000 Tibbo BASIC/C-programmable IoT module. The board carries the sockets for the module, additional sockets for connecting to external circuitry, a power jack and a power regulator, RJ45 jack (Ethernet port), MD button, and three status LEDs.

The EM2000 module is not included with the board and must be purchased separately.

For more information, see the EM2000EV documentation.

EM1000TEV Terminal Development System

EM1000TEV Terminal Development System

The ultimate platform for developing terminal and automation applications based on the EM1000 module (and, optionally, the GA1000 Wi-Fi add-on).

Comprised of a motherboard carrying the EM1000, and a number of additional boards carrying a display (several types available), keypad, serial ports and I/O.

For more information, see the EM1000TEV documentation.

EM1000EV Development System

EM1000EV Development System

An ideal tool for developing and testing multi-port serial applications based on the EM1000 module (and, optionally, the GA1000 Wi-Fi add-on).

Includes the motherboard with the EM1000 module, and an I/O board with four RS232 ports.

For more information, see the EM1000EV documentation.

EM1206SK Starter Kit

EM1206SK Starter Kit

The EM1206EV board plus accessories. The board comes with the RJ203+EM1206 module combination (soldered in) and, optionally, the GA1000 Wi-Fi add-on.

Also included on the board are the RJ45 jack with magnetics, power jack and regulator, one RS232 port with DB9 connector, LEDs, MD (setup) button, and a pin header for accessing the module's I/O pins.

For more information, see the EM1206EV documentation.

EM500EV Development System

EM500EV Development System

This kit is a two-board design consisting of a mainboard and an I/O board, which is available in two versions.

The mainboard carries a socket for the EM500 "MiniMo" module (included), RJ45 jack with magnetics, power jack and regulator, LEDs, and the MD (setup) button.

For more information, see the EM500EV documentation.

ControllersBoardsModulesDevkits