The DS1102 is a compact Tibbo BASIC/C-programmable controller with Ethernet and optional Wi-Fi* connectivity. The DS1102 targets serial-over-IP and serial control applications.
The DS1102 features a multi-channel RS232/422/485 port. The device has a single DB9M connector and is priced as a single-port product, yet provides 3 independent RS232 channels, 2 independent RS422 channels, or a single RS485 channel.
The device can be powered via its power jack or the available power-over-Ethernet module*.
In addition, the DS1102 can be equipped with a 96x32 monochrome OLED display.
There are eight LEDs on the device's front: green and red main status LEDs, yellow Ethernet link LED, and five blue LEDs, which can be used for Wi-Fi signal strength indication and other purposes. A buzzer is provided as well.
Each DS1102 is supplied with the DIN rail and wall mounting plates.
* Wi-Fi and power-over-Ethernet options are mutually exclusive.
10/100Base-T, auto-MDIX Ethernet port.
Software-selectable RS232, RS422, and RS485 modes:
Baudrates of up to 921,600bps;
None/even/odd/mark/space parity modes;
7 or 8 bits/character;
RTS/CTS and XON/XOFF flow control;
Up to 3 serial channels in the RS232 mode, flexible mapping:
Up to 2 serial channels in the RS422 mode, flexible mapping;
A single channel in the RS485 mode.
Based on the high-performance T1000 IC.
Optional 802.11b/g Wi-Fi interface.
Optional 96x32 monochrome OLED display.
Optional power-over-Ethernet (PoE).
Onboard RTC (no backup battery)
1MB flash memory for TiOS, application code, and file system.
2048-byte EEPROM for data storage.
Software-controlled onboard PLL.
Power: 12VDC nominal (9 ~ 18V).
Dimensions (LxWxH): 90x48x25mm.
Operating temperature range: -5 ~ +70C.
Firmware is upgradeable through the serial port or network.
*For this device can be used as crossover cable too
Create powerful, network-enabled applications in Tibbo BASIC and/or Tibbo C. Learn more...
Function Groups: String functions (27 in total!), date/time conversion functions (8), encryption/hash calculation functions (RC4, MD5, SHA-1), and more.
Variable Types: Signed and unsigned 8-bit, 16-bit, and 32-bit types; floating point and string types; user-defined arrays and structures.
|Documentation||DS110x Hardware Manual|
DS1102W Programming Platform
DB9-to-terminal block adaptor. Simplifies the installation and wiring of serial devices.