The DS1100 is a compact Tibbo BASIC/C-programmable controller with Ethernet connectivity. The DS1100 targets cost-sensitive serial-over-IP and serial control applications.
Built around the same T2000 ASIC as our EM500 "MiniMo" module, the DS1100 offers a single-channel RS232 port. The device can be powered via its power jack, pin9 of the DB9 (serial port) connector, or the available power-over-Ethernet module.
There are three LEDs on the device's front: green and red main status LEDs, and a yellow Ethernet link LED.
Each DS1100 is supplied with the DIN rail and wall mounting plates.
The DS1100 comes preloaded with a fully functional serial-over-IP (SoI) application that turns the DS1100 into a powerful serial over IP (SoI) device, a.k.a. the device server.
- 10/100Base-T auto-MDIX Ethernet port.
- Single-channel RS232 port on DB9M connector:
- TX, RX, RTS, CTS, DTR, and DSR lines;
- Baudrates of up to 115200bps;
- None/even/odd/mark/space parity modes;
- 7 or 8 bits/character;
- RTS/CTS and XON/XOFF flow control.
- Based on the second-generation ASIC (T2000).
- "12V" power input on pin 9 of the DB9.
- Optional power-over-Ethernet (PoE).
- 512KB flash memory for TiOS and application.
- 208-byte EEPROM for data storage.
- Three LEDs:
- Green and red main status LEDs;
- Yellow Ethernet link LED.
- Power: 12VDC nominal (9 ~ 18V).
- Dimensions (LxWxH): 90x48x25mm.
- Operating temperature range: -5 ~ +70C.
- Firmware is upgradeable through the serial port or network (including "cold" firmware uploads through the network).
- CE- and FCC-certified.
- DIN rail mounting plate
- Wall mounting plate with screws
- DS1101 3.5-channel RS232 controller
- DS1102 3-channel RS232/422/485 controller
*For this device can be used as crossover cable too
Create powerful, network-enabled applications in Tibbo BASIC and/or Tibbo C. Learn more...
- button — monitors the MD (setup) button.
- io — handles I/O lines, ports, and interrupts.
- net — controls the Ethernet port.
- pat — "plays" patterns on a pair of status LEDs.
- ppp — accesses the Internet over a serial modem (GPRS, etc.).
- pppoe — accesses the Internet over an ADSL modem.
- romfile — facilitates access to resource files (fixed data).
- ser — controls the serial port.
- sock — socket comms (up to 16 UDP, TCP, and HTTP sessions).
- stor — provides access to the EEPROM.
- sys — in charge of general device functionality.
Function Groups: String functions (27 in total!), date/time conversion functions (8), encryption/hash calculation functions (RC4, MD5, SHA-1), and more.
Variable Types: Signed and unsigned 8-bit, 16-bit, and 32-bit types; floating point and string types; user-defined arrays and structures.
Files and Documentation